10-22 15:58:43 drill pipe is a steel pipe with a thread at the tail, which is used to connect the surface equipment of the drilling rig and the carbonyl drilling and grinding equipment or bottom hole device located at the bottom of the well. The purpose of the drill pipe is to transport the drilling mud to the drill bit and raise, lower or rotate the bottom hole device together with the drill bit. The drill pipe must be able to withstand the internal and external pressure, distortion, bending and vibration of the world. In the process of oil and gas extraction and refining, geological electric drill
pipes can be used many times. The light pipe and the original steel pipe are made into drill pipes after many processing steps. First, through the treatment of the steel pipe thickening process, the outer surface of the smooth pipe is bent inward, and the steel pipe wall is thickened. In the next step, the thread is processed and plated with copper that can increase strength. A non-destructive quality control inspection is then carried out, followed by the welding of the steel pipe body joints. Then, the pipe body will undergo welding heat treatment with triangular-edge drill pipe treatment and welding final treatment to eliminate the residual pressure of welding. Before the finished drill pipe is painted and packaged, other tests should be carried out on the finished steel pipe, including hardness test, pressure test and non-destructive test. The drill bit is the main component of the drilling rig. It is a tool that transmits impact energy, directly contacts the rock, and blasts. During the whole operation process of the drill bit, the force is very complex and the grooved drill rod is mixed, so there are high requirements for the material and shape of the drill bit. 1. Before drilling the hole, check whether the down-the-hole impactor, the pipe drilling tool, the casing and the casing shoe are firmly connected, whether the eccentric drill bit rotates flexibly, and whether the ventilation is smooth. 2. Pay attention to the follow-up situation of the casing and the powder discharge in the hole during the drilling process. The diamond drill bit should be used to blow the powder out of the hole every 0.3 to 0.4 meters to keep the hole clean. When blowing holes, the upward lifting distance of the center drilling tool should be strictly controlled to achieve strong blowing and powder discharge. It is forbidden to pull the center drilling tool forcefully during the drilling process. 3. When drilling is over or the center drilling tool needs to be replaced, the hole should be cleaned first to blow out the residue at the bottom of the hole, then stop turning, and slowly lift the center drilling tool upwards. The lifting force is as good as the PDC drill bit. It is appropriate to lift the center drilling tool, and the lifting height is as long as the back of the eccentric drill bit is in contact with the front end of the casing shoe; then reverse the drilling tool at a low speed, and at the same time slowly lift the center drilling tool upwards. When it is observed that the center drill can be lifted smoothly, it indicates that the eccentric drill bit has been folded. At this time, the center drill can be lifted according to the conventional method until all the center drills are raised. When reversing the drill, you should be careful to prevent the drill from tripping. electric drill
manufacturers are required in the manufacture of almost every product and electric drill suppliers APPLICATION is one of the most common machines.
Zhangjiagang ronix trading co. LTD is one of China's leading providers of state-of-the-art . For decades, we've served numerous residential, commercial, and industrial clients. To contact us for a free quote for your home or business please visit Ronix Tools
Making a few technical tweaks to the way you structure and distribute APPLICATION could be the difference between an engaging, thought-provoking product and a perfunctory one.