Pre-upload

How to Grind the Face Milling Cutter Correctly

by:Ronix Tools     2021-05-28
The three-face milling cutter is a standard machine tool. It is usually used in horizontal milling. Its shape is like a 'round hole in the middle of the biscuits'. Its outer circle and the two end faces near the outer circle have cutting edges. Therefore, it is called a three-sided blade. There are inserts and integral ones. The material is commonly used as W18Cr4V. There are nearly a hundred specifications according to the diameter and width (thickness). When in use, the knife is installed on the shank of the horizontal milling machine. Of course, it can also be installed on other machine tools. It is generally used for milling grooves and steps.   Three-face and face milling cutter has a relief angle for all three cutting edges, the cutting edge is sharp, and the cutting is brisk. Its shape is like 'a round hole in the middle of the biscuits'. Its outer circle and the two end faces near the outer circle have cutting edges, so it is called a three-sided edge. The main cutting edges of the tri-face milling cutter are distributed on the cylindrical surface of the milling cutter, and the secondary cutting edges are distributed on both end surfaces. When in use, the knife is installed on the shank of the horizontal milling machine. Of course, it can also be installed on other machine tools. It is generally used for milling grooves and steps. The shape and use conditions of the 'face milling cutter' and the “end milling cutter” are completely different. The face milling cutter is called the end mill. The hard alloy face milling cutter can be ground with a grinder, and our company uses Tuol The mechanical tool grinder has a very good grinding effect. Disc milling cutters are like serrations at the outer diameter of the disc. Why is it called a three-sided blade because the front and back of the tooth and the vertical surface have an edge. In addition to the application of processing steps and grooves.   Improve the dynamic balance of the face milling cutter: it can greatly help improve the safety of the face milling cutter. Because the imbalance of the tool will produce an additional diameter for the spindle system The magnitude of the load is proportional to the square of the speed. Improving the dynamic balance of the tool can significantly reduce the centrifugal force and improve the safety of high-speed tools.    How to grind a three-face and face milling cutter: Use a tool grinder to grind a three-face and face mill Use a bowl-shaped grinding wheel to grind the two side relief angles and the main relief angle of the cutting edge. Generally, the relief angle is the relief angle of the tooth on the outer circle. Carbide three-sided edge milling cutters can be ground with a grinder. , Our company uses the tool grinder of Tuoer Machinery, and the grinding effect is very good.
With new and upcoming social commerce technologies, the biggest change for APPLICATION marketers will be a shift in focus from branding to lead generation and conversion.
Applied Materials’ mission is to be the leading supplier of APPLICATION worldwide-through innovation and enhancement of customer productivity with systems and service solutions.
Using high technology, APPLICATION showed its competitive advantages, captioned with information about the company's commitment to providing safe, reliable, profitable jobs to local artisans.
Establish a unique brand as Ronix Tools that cuts through the clutter, and you'll get you the capital you need to get moving.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP