The milling cutter
is a tool used for milling the plane of the workpiece in the machining process. Since it is larger than a general milling cutter and shaped like a disc, it is called a milling cutter. The milling cutter is generally installed with inserts that are not reground. For cemented carbide blades, install the milling cutter head on the main shaft of the milling machine, and press the wedge block on the cutter head for the cemented carbide blades on the cutter head. Then clamp the workpiece to be milled on the machine flat-nose pliers, or press it on the working surface of the milling machine, and then start the spindle, the milling cutter rotates, and the plane can be milled. Before buying a milling cutter head, you need to figure out your own needs. The following are the things you need to pay attention to when choosing a milling cutter head: Milling cutter head boring tool: 1. Should the fine boring tool be modular or integrated, and what is the processing accuracy? , What is the length of the processing, and whether it is required to add an extension rod to increase the processing range. 2. The rough boring tool should be modular or integrated, what is the scope of processing required, the length of processing, and whether extension rods are required. Milling cutter head drill: 1. Straight shank drill: It is required whether the drill is high-speed rigid or cemented carbide, what is the machining diameter, what is the depth of machining, and whether there is any requirement for the cutting edge. 2. Taper shank drill: What size is the original tool sleeve of the tool, what is the machining diameter, what is the machining depth required, and whether there is any requirement for the cutting edge. Milling cutter head taps: 1. Straight flute taps: What is the processing material, is it hand tapping or machine tapping. 2. Spiral taps: Need left-handed or right-handed taps, what size of thread is required, whether it is metric or inch, what is the processing accuracy, what is the material of the processing, and the standard of which country is the handle. The matters needing attention when choosing a milling cutter head are the above points. I hope it can help you.
It has become necessary for Zhangjiagang ronix trading co. LTD to continually cultivate, develop and update their skills to work successfully alongside high-tech.
Review Zhangjiagang ronix trading co. LTD's progress at regular intervals, so we can continue with the strategies that work well and change or eliminate the ones that don't give the results we are looking for.
Zhangjiagang ronix trading co. LTD affords you a suitable low price for proving our ethical considerations.